26% OFF
RRP $1,345.00
Description
The Siemens RDG400 Zone VAV Controller is a single zone controller with automatic heat/cool change-over function.
- VAV control of a single zone
- Temperature controlled
- 24V AC
- Duct sensor included
Designed for the following types of systems:
- Single-duct system
- Single-duct system with electric heater
- Single-duct system and radiator / floor heating
- Single-duct system with heating / cooling coil
- Room temperature control via built-in temperature sensor or external room temperature / return air temperature sensor. External remote sensor included
- Automatic or manual changeover between heating and cooling mode
- Selection of applications via DIP switches
- Selection of operating mode with operating mode button on the thermostat
- Display of current room temperature or setpoint in °C and/or °F
- Minimum and maximum setpoint limitation
- Button lock (automatic or manual)
- 3 multifunctional inputs, freely selectable for:
- Operating mode switchover contact (keycard, window contact, etc.)
- Changeover sensor for automatic heating / cooling mode
- External room temperature or return air temperature
- Dewpoint sensor
- Electric heater enable
- Faults
- Minimum and maximum limitation of air flow signal DC 0…10 V
- Floor heating temperature limit
- Reload factory settings for commissioning and control parameters
- Wizard function to select working temperature unit °C or °F
Reviews
Be The First To Review This Product!
Help other Controls Traders Pty Ltd users shop smarter by writing reviews for products you have purchased.
Siemens Zone VAV Damper Room Thermostat
SIE-CON-RDG400
$259.20
ex GST
In Stock
Description
The Siemens RDG400 Zone VAV Controller is a single zone controller with automatic heat/cool change-over function.
- VAV control of a single zone
- Temperature controlled
- 24V AC
- Duct sensor included
Designed for the following types of systems:
- Single-duct system
- Single-duct system with electric heater
- Single-duct system and radiator / floor heating
- Single-duct system with heating / cooling coil
- Room temperature control via built-in temperature sensor or external room temperature / return air temperature sensor. External remote sensor included
- Automatic or manual changeover between heating and cooling mode
- Selection of applications via DIP switches
- Selection of operating mode with operating mode button on the thermostat
- Display of current room temperature or setpoint in °C and/or °F
- Minimum and maximum setpoint limitation
- Button lock (automatic or manual)
- 3 multifunctional inputs, freely selectable for:
- Operating mode switchover contact (keycard, window contact, etc.)
- Changeover sensor for automatic heating / cooling mode
- External room temperature or return air temperature
- Dewpoint sensor
- Electric heater enable
- Faults
- Minimum and maximum limitation of air flow signal DC 0…10 V
- Floor heating temperature limit
- Reload factory settings for commissioning and control parameters
- Wizard function to select working temperature unit °C or °F
Reviews
Be The First To Review This Product!
Help other Controls Traders Pty Ltd users shop smarter by writing reviews for products you have purchased.
More from this category
20% OFF
RRP $462.00
